| 1. Measure your
kitchen or bath cabinet opening. |
|
| Typical Hinge Types |
|
| Does the door or hinges protrude
into the opening (even the slightest bit)? |
|
|
|
| If yes, then deduct another
3/4". So your total deduction will be 1" for the
guides and 3/4" for door and hinge clearance for
a total deduction of 1-3/4". |
|
|
|
If the opening you are putting
the shelves into has 2 doors you will need to deduct:
1" for the guides plus 1-1/2"
(3/4" on each side of opening)
for door and hinge clearance.
For a total deduction of 2-1/2". |
|
|
|
| 2) Choose
your sliding drawer kitchen cabinet kit mounting
style. |
|
|
Standard mount
Mounts directly to cabinet face frame and to the rear
of the cabinet using supplied Rear mount sockets.
Use this application when there is no shelf or only
half depth shelf. |
|
| |
|
Mount to shelf
Mounts directly to cabinet floor or existing full depth
shelf. Easiest installation. |
|
| |
|
| |
(Requires Mounting Kit - $4.95 extra per shelf
|
| |
|
| |
|
| 3) Choose guides |
| |
|
3/4 extension Blum® guides(
included)
RV Extension Guides for motor homes
Full extension KV® slides (add $16)
|
|
| |
|
| 4) Choose finish. |
| *Prefinished has
4 coats of clear lacquer & looks
like natural maple). |
Un-finished
$58.95 |
Pre-finished
$66.95 |
| 5) Choose depth |
12"-----Fits cabinets 12"-14" deep
14"-----Fits cabinets 14"-16" deep
16"-----Fits cabinets 16"-18" deep
18"-----Fits cabinets 18"-20" deep
20"-----Fits cabinets 20"-22" deep
22"-----Fits cabinets 22"-24" deep |
|
| |
|
| Shipping - $8.95 per
shelf (custom shelves) |
|
Order
4 sliding shelves or more and get "18 volt
reversible cordless drill with 3/8" keyless chuck (5
variable clutch adjustments), detachable battery, charger,
6 drill bits, 6 driver bits, bit extension and durable
hard plastic carrying case. (shipping is $5.95) |
|